Maintenance of crusher

1, the plastic crusher should be placed in a ventilated position to ensure that the motor work heat dissipation, extend its life.

2. Lubricating oil should be added to bearings regularly to ensure lubricity between bearings.

3, regularly check the tool screw, 1 hour after the use of the new plastic crusher, use the tool to tighten the knife, set the knife screw, strengthen the stability between the blade and the tool holder.

4, in order to ensure the sharpness of the cutting tool, the tool should be regularly checked to ensure its sharpness and reduce unnecessary damage to other parts caused by the blunt edge.

5, when replacing the tool, the gap between the moving tool and the fixed tool: more than 20HP crusher 0.8MM is better, less than 20HP crusher 0.5MM is better. The thinner the recycled material, the gap can be appropriately enlarged.

6, before the second start, the remaining debris in the machine room should be removed first to reduce the starting resistance. The inertia cover and pulley cover should be opened regularly, and the ash outlet under the flange should be cleared, because the powder discharged from the plastic crusher chamber into the shaft bearing.

7. The machine should be well grounded.

8, regularly check whether the plastic crusher belt slack, timely tightening.