Copper wire granulator machine daily maintenance methods.
The emergence of copper wire granulator is the most cost-effective hot product for recycling waste wire and cable resources in recent years. Any equipment has a life, want to long-term use, it is necessary to carry out daily maintenance, the daily cleaning of parts is also essential.When using the copper wire granulator, we need to clean it regularly.
1.Screen: It is filtered copper particles, so that copper and plastic separation more pure, high purity. It is a very important part, so it is easy to block when used, and it needs to be cleaned up half a month, which is conducive to the use of copper rice machine.
2.Feed port: This is also very easy to block the place, the bearing wire specification is too large will be blocked, need to stop processing, so before the boot operation, the waste line is probably screened to ensure that the specifications of the waste line does not exceed the configuration of the copper machine feed port.
When the copper wire granulator has been added lubricating oil before leaving the factory, it is used for the debugging of the equipment. When you start to use it, you need to refill it, and fill the lubricating oil once every half month to ensure that the machine is used without noise and without stalling. In addition, summer and winter lubricants are different and need to be used differently.
The tool will also become dull after a period of use, which will affect the sorting effect. So it needs to be polished every once in a while, and the tool will be narrowed after multiple grinding. When the clearance between the rotating blade and the fixed blade of the housing cannot meet the crushing requirements, the tool needs to be replaced. When polishing or replacing the tool, the power supply should be turned off before operation, and the gap between the moving tool and the fixed tool should be adjusted after polishing or replacing the tool.
if the diameter of the processed waste wire is too thin, the separation rate of copper wire and plastic of the copper wire granulator equipment will also be affected, and there will be unclean separation. Secondly, the installation and debugging of the copper pelletizer equipment before operation is also a top priority, including the load test of the copper rice machine.
If you want the copper pelletizer to give you long-term and stable benefits, you must do a good job of cleaning and maintenance. More questions about copper wire pelletizer can be consulted at any time Nanjing Buqin Machinery Co., LTD., we will certainly bring you help.